TireIron BeadBrakR

1. Remove wheel from the bike.

2009-02-13T16:36:59Z

BestRest
1. Remove wheel from the bike.

2. Open the BeadBrakR pouch and lay out the parts. Note that the red lanyard holds all the quick release pins; remove the pins from the lanyard before you begin.

2009-02-13T16:34:43Z

BestRest
2. Open the BeadBrakR pouch and lay out the parts. Note that the red lanyard holds all the quick release pins; remove the pins from the lanyard before you begin.

3. Use the Valve Stem Multi-Tool to deflate the tire and remove the valve stem.

2009-02-13T16:34:09Z

BestRest
3. Use the Valve Stem Multi-Tool to deflate the tire and remove the valve stem.

4. Assemble the BeadBrakR. The illustrated instruction sheet walks you through each step.

2009-02-13T16:35:53Z

BestRest
4. Assemble the BeadBrakR. The illustrated instruction sheet walks you through each step.

5. Here a tire iron is being pinned vertically into the Corner. The "sand foot" is on the left side of the horizontal tire iron. The sandfoot keeps the device upright during assembly and ...

2009-02-13T16:36:21Z

BestRest
5. Here a tire iron is being pinned vertically into the Corner. The "sand foot" is on the left side of the horizontal tire iron. The sandfoot keeps the device upright during assembly and ...

6. Here a tire iron is being pinned into the Lever.

2009-02-13T16:37:03Z

BestRest
6. Here a tire iron is being pinned into the Lever.

7. Here the Lever has a tire iron in place.

2009-02-13T16:38:15Z

BestRest
7. Here the Lever has a tire iron in place.

8. Here the Plunger is being fitted to the Lever. Note the multiple assembly holes that allow you to adjust for different size tires and rims.

2009-02-13T16:36:32Z

BestRest
8. Here the Plunger is being fitted to the Lever. Note the multiple assembly holes that allow you to adjust for different size tires and rims.

9. Here we're showing the Lever fully assembled with the Plunger.

2009-02-13T16:36:55Z

BestRest
9. Here we're showing the Lever fully assembled with the Plunger.

10. We've fitted the Lever to the vertical tire iron, and snapped the two plywood blocks in place on the Corner; they protect the rim from scratches.

2009-02-13T16:37:09Z

BestRest
10. We've fitted the Lever to the vertical tire iron, and snapped the two plywood blocks in place on the Corner; they protect the rim from scratches.

11. We slipped the Lock Bar onto the horizontal tire iron. The Lock Bar prevents movement of the BeadBrakR in relation to the tire.

2009-02-13T16:36:34Z

BestRest
11. We slipped the Lock Bar onto the horizontal tire iron. The Lock Bar prevents movement of the BeadBrakR in relation to the tire.

12. After full assembly, pull the pin holding the Lever to the upright tire iron, and set the Lever aside.

2009-02-13T16:37:30Z

BestRest
12. After full assembly, pull the pin holding the Lever to the upright tire iron, and set the Lever aside.

13. Lift the wheel and lower it onto the vertical tire iron.

2009-02-13T16:35:41Z

BestRest
13. Lift the wheel and lower it onto the vertical tire iron.

14. Lowering the wheel into place.

2009-02-13T16:38:40Z

BestRest
14. Lowering the wheel into place.

15. The vertical tire iron is fitted up thru a wide spot in the spokes.

2009-02-13T16:35:22Z

BestRest
15. The vertical tire iron is fitted up thru a wide spot in the spokes.

16. Make sure the plywood blocks are in place on the Corner; they protect the rim from scratches.

2009-02-13T16:37:19Z

BestRest
16. Make sure the plywood blocks are in place on the Corner; they protect the rim from scratches.

17. Pull the BeadBrakR toward you, so the vertical tire iron and plywood blocks are TIGHT against the inside of the rim. Then slide the Lock Bar TIGHT up against the tire. This prevents ...

2009-02-13T16:37:01Z

BestRest
17. Pull the BeadBrakR toward you, so the vertical tire iron and plywood blocks are TIGHT against the inside of the rim. Then slide the Lock Bar TIGHT up against the tire. This prevents ...

18. Reattach the Lever to the upright tire iron.

2009-02-13T16:35:54Z

BestRest
18. Reattach the Lever to the upright tire iron.

19. Adjust the Plunger so it's nearly VERTICAL above the tire, and so the end of the Plunger contacts the tire about 1/2" from the rim.

2009-02-13T16:34:34Z

BestRest
19. Adjust the Plunger so it's nearly VERTICAL above the tire, and so the end of the Plunger contacts the tire about 1/2" from the rim.

20. Position yourself so you're facing the tire. Kneel down so the sandfoot is between your knees.

2009-02-13T16:38:51Z

BestRest
20. Position yourself so you're facing the tire. Kneel down so the sandfoot is between your knees.

21. Another view showing proper position of your body. Use both hands on the end of the Lever. Use both arms to keep the Lever from twisting to the side.

2009-02-13T16:38:43Z

BestRest
21. Another view showing proper position of your body. Use both hands on the end of the Lever. Use both arms to keep the Lever from twisting to the side.

22. The Lever should start from a 20 degree upward angle. Adjust the Plunger accordingly.

2009-02-13T16:38:02Z

BestRest
22. The Lever should start from a 20 degree upward angle. Adjust the Plunger accordingly.

23. Press down on the end of the Lever SLOWLY. Don't pound on it, jump on it, or otherwise force it. Adjust the position of the Plunger if needed. It make take two or more attempts to ge ...

2009-02-13T16:37:41Z

BestRest
23. Press down on the end of the Lever SLOWLY. Don't pound on it, jump on it, or otherwise force it. Adjust the position of the Plunger if needed. It make take two or more attempts to ge ...

24. Here we see the bead beginning to separate.

2009-02-13T16:34:38Z

BestRest
24. Here we see the bead beginning to separate.

25. As you press down on the end of the Lever, the Plunger will depress the sidewall and the bead will break free.

2009-02-13T16:38:52Z

BestRest
25. As you press down on the end of the Lever, the Plunger will depress the sidewall and the bead will break free.

26. Here's a closeup of the end of the Plunger, showing the bead broken free from the rim.

2009-02-13T16:38:30Z

BestRest
26. Here's a closeup of the end of the Plunger, showing the bead broken free from the rim.

26. Once both beads are free of the rim, use some BeadGoop on the rim and the tire bead to make the tire demounting / mounting process easy. The key to efficient tire changing is not the s ...

2009-02-13T16:34:54Z

BestRest
26. Once both beads are free of the rim, use some BeadGoop on the rim and the tire bead to make the tire demounting / mounting process easy. The key to efficient tire changing is not the s ...

New LockBar 5

2008-11-22T03:08:45Z

BestRest
New LockBar 5

New LockBar 6

2008-11-22T03:09:33Z

BestRest
New LockBar 6

New LockBar 3

2008-11-22T03:09:33Z

BestRest
New LockBar 3

With the sidewall lifted up you'll have room to fit your fingers, pull a tube, or insert a new valve stem

2008-11-22T03:09:33Z

BestRest
With the sidewall lifted up you'll have room to fit your fingers, pull a tube, or insert a new valve stem

With the sidewall lifted up you'll have room to fit your fingers, pull a tube, or insert a new valve stem

2008-11-22T03:09:33Z

BestRest
With the sidewall lifted up you'll have room to fit your fingers, pull a tube, or insert a new valve stem

New LockBar 1

2008-11-22T03:09:33Z

BestRest
New LockBar 1

New LockBar 4

2008-11-22T03:09:34Z

BestRest
New LockBar 4

New LockBar 2

2008-11-22T03:09:34Z

BestRest
New LockBar 2

OLYMPUS DIGITAL CAMERA

2008-11-22T03:25:09Z