2. Open the BeadBrakR pouch and lay out the parts. Note that the red lanyard holds all the quick release pins; remove the pins from the lanyard before you begin.

Gallery pages: 1 2 3 4 5 6 > >>

< 2 of 58 >

BestRest > 1. Remove wheel from the bike.

BestRest > 2. Open the BeadBrakR pouch and lay out the parts. Note that the red lanyard holds all the quick release pins; remove the pins from the lanyard before you begin.

BestRest > 3. Use the Valve Stem Multi-Tool to deflate the tire and remove the valve stem.

BestRest > 4. Assemble the BeadBrakR. The illustrated instruction sheet walks you through each step.

BestRest > 5. Here a tire iron is being pinned vertically into the Corner. The "sand foot" is on the left side of the horizontal tire iron. The sandfoot keeps the device upright during assembly and keeps it from digging into soft earth.

BestRest > 6. Here a tire iron is being pinned into the Lever.

BestRest > 7. Here the Lever has a tire iron in place.

BestRest > 8. Here the Plunger is being fitted to the Lever. Note the multiple assembly holes that allow you to adjust for different size tires and rims.

BestRest > 9. Here we're showing the Lever fully assembled with the Plunger.

2. Open the BeadBrakR pouch and lay out the parts. Note that the red lanyard holds all the quick release pins; remove the pins from the lanyard before you begin.

Original size: 800px x 600px |

Current: 400px x 300px |

Other sizes: Small • M • L • O • save photo |

Share photo: links, forums, blogs |

Gallery pages: 1 2 3 4 5 6 > >>

< 2 of 58 >

Comments

New comment: Requires approval

Name: Email: Link:

Connect with Facebook

Comment on: | Rating: stars

To foil spammers, enter this code:

in this box: Code unreadable?

Available Feeds | What are feeds?

Gallery Photos:

Atom |

RSS